AI Tech Pack for Lingerie and Intimates: Delicate Construction Specifications
Create AI tech packs for lingerie and intimates — bra construction, underwear specs, elastic specifications, and delicate fabric requirements.
Lingerie tech pack challenges
Lingerie and intimates are among the most technically demanding garment categories. Small measurement differences create fit problems, elastic tension must be precisely specified, cup construction involves multiple specialized components, and fabric sheerness and stretch characteristics are critical.
An AI tech pack for lingerie from Skema3D addresses these challenges by generating specifications with the precision that intimate apparel requires — down to elastic tensions, hook-and-eye counts, and seam width specifications.
Bra construction specifications
Bra tech packs require specialized component specifications.
- Cup construction: molded, cut-and-sew (2-part, 3-part), or unlined — specify cup lining and padding
- Underwire: wire shape (U-wire, J-wire), wire gauge, channel width, wire length per cup size
- Band: power mesh or elastic fabric, hook-and-eye closure (2x3 for A-C cup, 3x3 for D+ cup)
- Straps: adjustable with slider and ring, strap width (10-15mm standard), convertible options
- Center front: bridge width and construction, gore attachment method
- Elastic: specify fold-over elastic (FOE) or picot edge elastic at all edges, width and tension
Underwear and brief specifications
Underwear tech packs focus on different details than outerwear garments.
Underwear style specifications
| Style | Key Specs | Typical Fabric | Elastic Detail |
|---|---|---|---|
| Brief | Full coverage front and back, high leg | Cotton/spandex jersey | Leg and waist elastic, enclosed or picot |
| Bikini | Low-rise waist, moderate coverage | Microfiber or cotton | Narrow elastic, bonded or fold-over |
| Thong | Full front coverage, thong back | Microfiber, lace | Narrow elastic throughout, flat construction |
| Boyshort | Full coverage, short-leg cut | Cotton jersey or modal | Wide waistband elastic, smooth leg opening |
| Boxer brief | Mid-thigh length, contoured pouch | Modal or cotton/spandex | Wide waistband (30-40mm), no-roll construction |
Fabric and trim requirements
Lingerie fabrics are typically lightweight (60-140 gsm) with high stretch content (15-25% spandex). Your AI tech pack should specify opacity, stretch and recovery, hand feel (soft, smooth, silky), and colorfastness requirements for washing.
Trim specifications include: lace (type, width, scallop pattern), ribbon (satin, grosgrain, width), bows (size, placement), and labels (soft-touch heat transfer or printed, no woven labels that irritate skin).
Generating lingerie AI tech packs
When prompting Skema3D, specify the intimate garment type, support level (wireless, underwire, sports), size range (specify band and cup for bras), and fabric preference. The AI tech pack generates appropriate construction details for the category.
Visit /ai-tech-pack-generator and describe your lingerie piece. The AI understands intimate apparel construction and generates tech packs with the specialized specifications that lingerie manufacturers require.